If you own a tanning bed, it is just a matter of time before you need tanning bed parts. Tanning bed parts must be routinely changed out to ensure the continued proper operation of the tanning bed. These parts can get costly if you aren't careful.
For this reason, it is in your best interest to find cheap sources for the parts - before you need them. It is also essential that you know how to change the parts yourself! The most common parts of the tanning bed that must be changed are the lamps. They burn out over time - just like light bulbs.
You can purchase lamps for your bed from the dealer, and if your bed is still under warranty, a representative will usually come out to replace the lamps. However, you will get a much lower price on the lamps if you purchase them through a wholesale tanning supply company. This is how your dealer buys them, and they buy in bulk. You should also buy your lamps in bulk for even more savings! When you are ready to purchase lamps, you need to know the make and model of your bed.
With this information, you can easily find a wholesale company online that sells to the public. Simply use their wizard to find the lamps that you need - using the make and model of your bed. If you are unsure of the make and model, look at the lamps that are currently in your bed. There should be written information somewhere on the lamp.
This information will identify the type of lamp that your bed requires. Fans also need to be replaced - but not nearly as often as the lamps do. Fans can be purchased in bulk, but because these parts won't be changed very often, it really isn't necessary. Fans that aren't working properly can damage both the bed and your skin! If you have a fan that isn't working properly, don't use the bed until you get it replaced! Acrylic shields will eventually have to be replaced. They typically last about 10,000 hours.
That is 10,000 hours of usage - when the bed is in operation. Nicks and scratches on the surface of the acrylic shield can be dangerous as it allows more UV rays to seep through - and depending on how bad the nicks and scratches are, they may also allow heat to seep through! Changing parts isn't nearly as difficult as you might imagine. In most cases, instructions for changing common parts can be found in the owner's manual. If you cannot locate these instructions, contact your dealer, and have them send a representative out to teach you how to change specific parts such as lamps, fans, and acrylic shields.
This is a service that they should provide, but if they don't - go to them. Literally go to the dealership and find a nice salesman who will show you how to change these common parts. When you clean the bed, this is a good time to do a routine maintenance as well.
Check all parts of the bed to ensure that everything looks okay, and that it is operating properly. Routine inspections, cleaning, and maintenance will help lengthen the life of your bed. Tanning beds are affordable now days, but they are still a high ticket investment that most people cannot afford to make too often. Take the time to make sure that your tanning bed remains in great condition! The bed should be cleaned after each use.
Use a sanitizer that is designed for use on indoor tanning beds. The container that the cleanser comes in should state that it is safe to use on indoor tanning beds - specifically. Using other types of cleaners, which are not designed for indoor tanning beds - will damage the acrylic shields! Always check the refund and exchange policy of the wholesale company or of a dealership before making a purchase of tanning bed parts - whether the purchase is made online or offline.
Sometimes, the wrong part arrives, or it arrives in less than perfect shape. You need to be able to return it for a refund, or return it for an exchange!.
Suntan-bed.com provides you with info on how to determine what the best tanning beds are and where you can get suplies such as tanning bed parts, bulbs and lotions, come check us out at http://www.suntan-bed.com/